|
CONTENT
目錄
1 Design basis and conditions 設計依據和條件 2
2 Scope of proposal 項目范圍 4
3 Performance guarantees 履約保函 6
4 Description of the plant 工廠描述 7
4.1 Process description 工藝描述 7
4.2 Electricity and automation電氣和自動化 11
5 Main equipment List 主機設備清單 16
6 Project Schedule項目過度表 19
7 Site service and technology training 服務與技術培訓 20
Annex1 Equipment list of the cement line
附件1：水泥生產線設備清單
Annex2 Process flow sheet
附件2：工藝流程
Annex3 General layout
附件3：總體布局
1. Design basis and conditions
1.1 Locations of the plant:
1.2 Technology way: dry rotate kiln technology
1.3 Production capacity 1000t/d clinker
1.4 Cement variety Ordinary Portland Cement according to
Chinese standard
1.5 Site condition
Plant site condition(工廠條件)
1.5.1 Altitude of the site above sea-level(廠址海拔標高)：60m
1.5.2 Temperature(溫度):
Annual average(年平均):
Average of the hottest month: Max. (最熱月份平均氣溫：最高): 48 ℃
Average of the coldest month: Min. (最冷月份平均氣溫：最低): 8 ℃
1.5.3 Rainfall (降雨量)
Max. (within a hour/day) (最大降雨量：一小時/天): 2 mm
Annual average(年平均): 6 mm
Number of rainy days(降雨天數) ： 80 days
1.5.4 Earthquake factor at site(廠區地震等級): No
1.5.5 Max. wind velocities at site(廠區最大風速): 140m/s
1.6 Characteristics of Raw Materials
|
Limestone |
CaO |
MgO |
K2O+Na2O |
SO3 |
f SiO2 |
|
Limestone 1 |
>48 |
<3 |
<0.6 |
<1 |
<4 |
|
Limestone 2 |
>45 |
<3.5 |
<0.8 |
<1 |
<4 |
1.7 Seismic intensity < Richter scale 7Characteristics
1.8 A plan and flat land is assumed with the soil bearing capacity of 200 kpa/m2
1.9 Wind pressure Pa
1.10 Temperature: yearly average ℃
1.11 Clinker module
The contractor can specify the raw material proportioning for raw meal, The average components of clinker must be in conformity with the requirements of clinker module.:
承包商可以指定生料配料，熟料的平均成分必須符合熟料模塊的要求：
Lime saturation value of clinker：KH=0.89±0.01。
熟料的石灰飽和值：KH = 0.89±0.01
Silica modulus： SM=2.6±0.1。
二氧化硅模量：SM = 2.6±0.1
Alumina iron modulus： IM=1.6±0.1。
鋁鐵模數：IM = 1.6±0.1
|
